사출성형기의 소음은 어디서 발생하나요?

는 사출 성형기 우리 생활에서 플라스틱을 사용하는 데 큰 편리함을 제공하는 플라스틱 금형을 생산하는 중요한 기계입니다. 사출성형기 사용시 소음이 자주 발생합니다. 이 소음은 어디에서 오는가?

Generally, when the injection molding machine is used normally, there will be some noises. 는se noises can be used to judge that the operation of the machine is very normal, because some noises appear under normal conditions, and some noises are caused by faults. When the injection molding oil pump produces abnormal noise and vibration, it is usually possible from many aspects, for example, the installation of the oil pump motor is not concentric, the coupling of the oil pump is loose, the oil level is too low, etc., which will cause the oil pump to appear. cause of noise. At this time, the cause should be identified through inspection, and then a reasonable response can be taken to solve the problem. If the injection molding machine encounters a lot of noise from the motor during operation, it may be caused by damage to the motor bearing, so it is necessary to replace the connecting bearing. 는 noise of the injection molding machine may also have other sources, such as the total pressure valve, pipeline, hydraulic cylinder may be the source of the noise.

사출성형기에서 소음이 발생하는 경우, 정확한 유지보수 작업을 수행하기 전에 소음의 원인을 확인하고 찾아내는 것이 필요합니다.